5mm thick, 24mm wide 6082-T6 aluminium bar with relief/detail slots down the centreline.
Basic, simple and easy to fit to loads of different bikes or special builds and have loads of different uses. Can be bent easily (see picture) to form exhaust hangers or fairing/bellypan mounts.
9mm mounting holes, gives enough scope to fit most applications that use 8mm bolts and can easily be taken out to 10 or 12mm if needed.
Length measured centre to centre.
Supplied plain/unfinished & deburred.
Basic, simple and easy to fit to loads of different bikes or special builds and have loads of different uses. Can be bent easily (see picture) to form exhaust hangers or fairing/bellypan mounts.
9mm mounting holes, gives enough scope to fit most applications that use 8mm bolts and can easily be taken out to 10 or 12mm if needed.
Length measured centre to centre.
Supplied plain/unfinished & deburred.
Technical specifications
| Condition: | New |